Types of Chipboard Screw

Chipboard screws can be made from a variety of materials. The most common types are yellow zinc, brass, and black oxide. They can have pan, bugle, or flat head shapes. They also may have Phillips, square, or flat drive configurations. If the chipboard screw is being used on hard wood, make sure the screws are rated for that particular material.

Chipboard screws are usually thinner than standard wood screws, and they have special nibs built into their head. These nibs help the screw countersink into the wood and eliminate the need for pre-drilling. These screws are also self-tapping, which saves the installer time. Chipboard screws can be used for both interior and exterior projects. These screws can save the installer a lot of time and money.

Because of their thin core diameter and sharp thread angles, chipboard screws are ideal for soft wood. Because of these characteristics, they help reduce insertion torque, pull-out forces, and splitting effects. However, they are less suitable for hard wood, where friction and insertion torque are higher and may result in broken screws.

Chipboard screws are widely used in construction projects, such as garden decking, where they provide additional holding force. They are also referred to as woodscrews.